Have you got the latest Tecno Spark 5 Air smartphone? if you are stuck in software related issues and want the proper way out to get rid of this situation, then go through this complete guide. Here, you will find the latest Stock ROM for your Tecno Spark 5 Air along with the detailed installation guide.
Reasons To Install Stock Firmware Flash File on Smartphone
Flashing the stock firmware flash file on the smartphone is the need of an hour in many situations. The most common of them are as follow:
- Bootloop Issues
- IMEI Issues
- Bricked phone
If you are facing any of the above or the other software related issues, then you might opt for flashing the the stock firmware flash file on your smartphone.
The installation of Stock firmware file is pretty much easy. But before, you might take a complete back-up of your important data to prevent any data loss.
Download Tecno Spark 5 Air Flash File (Stock ROM)
- File Type: Tecno_Spark_Air_5_MT6761.zip
- File Name: Tecno Spark Air 5 Stock ROM (Firmware File)
- File Size: 1.5 GB
- Latest Flash Tool: SP Flash Tool
Guide To Install The Firmware Flash File (Stock ROM) on Tecno Spark Air 5
Step 1: Download the SP flash tool and Tecno Spark Air 5 firmware flash file from the download section and extract it.
Step 2: At this moment, navigate to the extracted SP flash tool folder and click on the flash_tool.exe file to run the flash tool.
Step 3: Once the SP flash tool runs successfully, then simply click on the “Scatter-Loading button” and locate & select the scatter file that you will find in the firmware flash file folder.
Step 4: Next adding the scatter file to the SP flash tool, now you need to uncheck the “Preloader option” in the SP flash tool as it is very important.
Step 5: Moving towards the flashing, now click on the “Download” button and grab your phone. Switch it “OFF” and connect it to your computer via the original cable. Regarding the detection of your smartphone, you need to press one of the key Volume down/Volume up in order to detect your phone by SP flash tool.
Step 6: After that, your Tecno Spark Air 5 will successfully be detected by the SP Flash tool, then it will start the flashing process.
Step 7: Wait for the flashing process to complete, when it gets complete, then you will see the “green tick mark” at the end as a sign of successful flashing process.
Step 8: At last, disconnect your smartphone and close the SP flash tool.
That’s it, You have finally managed to install the firmware flash file on your smartphone. Enjoy your smartphone on original versions.
Tecno Spark Air 5 Specifications
Tecno Spark Air 5 was officially released on May 05, 2020. Regarding the display, the phone is equipped with 7.0 inches IPS LCD touchscreen, providing the resolution of 720 x 1640 pixels.
Moreover, the phone operates on Android 10 (Go edition) including HIOS 6.0 powered by a Quad-Core processor. As for the storage, the phone offers 32 GB of internal memory paired with 2 GB RAM and also support micro-SD card for additional storage.
The camera features Dual 13MP + QVGA primary lens with Quad-LED flash including other features. In addition, 8MP secondary lens with Dual-LED flash for selfies is available at front.
WLAN, Bluetooth, GPS, Radio, and USB parameters are available for connectivity options. It is powered by Li-Po 5000 mAh battery.
Officially available in Ice Jadeite, Spark Orange, Vacation Blue, and Misty Green colors.